分类: SIEMENS instabus

Room Control Unit UP 227

2015年4月22日 at 上午11:59分类:SIEMENS instabus

Multifunctional display-/control panel for KNX with Dot-Matrix LCD display 96 x 128 pixels
V For the display and control of at least 10 adjustable room control functions:
– Switching toggle/On/Off
– Door bell function On/Off
– Dimming
– Solar protection control
– Send 1 Byte/2 Byte value
– Display 1 Bit/1 Byte/2 Byte value
– Forced control
– Display text messages
– Recall and save scenes
– Warning and alarm messaging
V 8 capacitive touch buttons for horizontal operation‚ blocking selectable for each function and configurable
for each function depending on the value of the blocking object
V Green/red LED als Orientierungslicht‚ as orientation light‚ as status indication‚ as a response to pressing
a button respectively to the signalling of alarm reports
V A signaler for acoustical alarm reports respectively as a status of the touch operation
V Integrated room temperature sensor
V Evaluation and weighting of an external inside temperature sensor
V Room temperature control configurable as two-step control and/or continuous control‚ for exclusive
heating operation‚ exclusive cooling operation or heating and cooling operation
V Selectable operating modes over the KNX:
– Comfort
– Pre-comfort
– Energy-savings and protection
V Local indication
– Of the active operating modes or automatic- respectively manual mode
– Inside temperature or outside temperature
– Heating or cooling mode
– Dew point alarm
– Open windows
V Local switching between
– Manual- and automatic mode
– Comfort‚ pre-comfort‚ energy-saving- and protection mode
V Adjustable time-limited extension of the comfort mode
V Adjustable room temperature setpoint shifting for comfort mode
V Via KNX set basic setpoint value of the room temperature for comfort mode
V An outside temperature based temperature setpoint value tracing in the cooling operation
V Adjustable dead zone between the heating setpoint value and the cooling setpoint value for comfort
mode
V Transmission of controller output(s) either as On/Off switching commands or as control commands in
the range 0…100 %
V Local display of the manually selected fan rotational speed respectively of the automatic adjustment
of the fan rotational speed
V Adjustable fan rotational speed respectively automatic adjustment of the fan rotational speed on the
controller
V Weekly schedule programme for controller- operating modes‚ automatic mode and at the least 8 room
control functions
V At the least 40 schedule tasks and Display and set of the date and time
V User control of LCD background lighting and Background color
V Display system settings and room temperature controller in the languages: German‚ English‚ French‚
Italian od Spanish
V User setting of at least 3 operating languages also Integrated bus coupling unit‚ bus connection via
bus terminal possible
V Flush mounted device for the mounting in an flush wall box Ø 60 mm‚ for fixing on the mounting plate
AQR2500NF via lateral springs (separately specified)

Room Controller Contouch‚ incl. bus coupling unit

2015年4月22日 at 上午11:58分类:SIEMENS instabus

Multifunctional display/operating device for KNX‚ with 320 x 240 pixel‚ 2.8″ LCD color display
V For the display and operation of at least 18 configurable room operator functions:
– Switching On/Off/Over and Pushbutton function (bell function)
– Shutter/blind/roller control
– Value transmission: 1 byte in %‚ 1 byte integer without prefix‚ 1 byte integer with prefix‚ 2 byte integer
without prefix‚ 2 byte integer with prefix
– Positively driven operation
– Scene control: Store and call up scene 8 bit‚ store and call up scene 1 bit
– Text display and warning and alarm indications
V Operation using touch screen and/or by turning/pushing rotary/push button
V RGB LED as orientation light or for signaling alarm indications
V Buzzer for acoustic alarm indication or as feedback when operating touch screen
V Integrated room temperature sensors
V Analysis and weighting of an external inside temperature sensor
V Room temperature control can be set as a two-point control and/or continuous-action control for
heating only‚ for cooling only‚ or for heating and cooling mode
V Operating modes that can be switched via KNX: comfort mode‚ pre-comfort mode‚ energy-saving
mode and frost or heat protection mode
V Local displaying of active operating modes or automatic or manual modes
V Local displaying of heating/cooling valve open‚ dew point alarm and open window
V Local switchover between automatic or manual mode‚ and between comfort‚ pre-comfort‚ energy-saving
and protection modes
V Local‚ time-adjustable extension of comfort mode
V The room temperature setpoint value for comfort mode can be set via a rotary button on the room
controller
V Basic room temperature setpoint value for comfort mode which can be set via the KNX
V Outdoor temperature-based tracking of temperature setpoint value in cooling mode
V Adjustable dead zone between the heating setpoint and the cooling setpoint for comfort mode
V Two-level heating or cooling
V Output of the control variable(s) either as an on/off switch command or as a positioning command in
the range of 0…100%
V Local displaying of manually set fan speed step or automatic speed input
V Fan speed step can be set via the rotary button or entered automatically by the controller
V Weekly scheduling program for controller operating modes and for 18 room operator functions
V At least 16 time switching points per function per weekday
V Display of date and time
V Selection of at least 4 different design templates as operator and display interface
V Local activation of a cleaning function to lock the touch screen and the rotary/push button
V Slot for a micro SD card for transferring firmware and configuration data
V incl. bus coupling unit (included in delivery)
V Bus connection via bus terminal
V Connection of the separate 24 V DC boost voltage‚ power consumption approx. 50 mA
V Flush-mounting device for mounting in a Ø 60 mm installation box‚ with screw fixing

Product Title Stock No. Product No.
Room Controller Contouch‚ incl. bus coupling unit‚ titanium white 5WG1204-2AB11 UP 204/11
Room Controller Contouch‚ incl. bus coupling unit‚ carbon metallic 5WG1204-2AB21 UP 204/21
Room Controller Contouch‚ incl. bus coupling unit‚ aluminium metallic 5WG1204-2AB31 UP 204/31
Room Controller Contouch‚ incl. bus coupling unit‚ piano black 5WG1204-2AB51 UP 204/51

Touch screen room thermostat with KNX communications‚ for 2-/4- pipe fan coil‚ universal applications or compressors in DX-type equipment

2015年4月22日 at 上午11:56分类:SIEMENS instabus

Touch screen room thermostat for 2-/4-pipe fan coil‚ universal applications or compressors in DX-type
equipment
– KNX communications
– Operating modes: Comfort‚ Economy and Protection
– For heating and/or cooling applications
– 2 or 3-position control outputs
– Output for 1-speed or 3-speed fan
– 2 multifunctional inputs for keycard contact‚ external room / return air temperature (QAH11.1‚
QAA32)‚ heat / cool changeover‚ window contact on/off‚ dewpoint monitor‚ electrical heater enabled‚
fault contact‚ presence detector
– Automatic or manual heating/cooling changeover
– Adjustable commissioning and control parameters
– Minimum and maximum setpoint limitation
– Color of housing: Ivory white
– Backlit display

Venetian blind actuator‚ 8x AC 230 V‚ 6A‚ with sunlight tracking of slats N 523/11

2015年4月22日 at 上午11:54分类:SIEMENS instabus

8 channels
V For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with
a motor for AC 230 V and electromechanical limit switches
V Rated contact voltage AC 230 V‚ 50 Hz
V Configurable behavior in the event of a bus voltage failure
V Configurable behavior in the event of a system voltage recovery
V Automatic mode for sunlight tracking control
V Manual mode
V Indication of direct operation with status object
V Status position of slats‚ 8-bit
V Integrated 1-/8-bit-scene control‚ 8 Scenes to be integrated per channel
V Suitable for integration in a sunlight tracking control system
V Sun protection control (up/down) using position data (8-bit value)
V Integrated power supply unit for the electronics‚ connected to AC 230 V
V Slat control (open/close) using position data (8-bit value) or travel to end position‚ stopping‚ stepwise
adjustment

Venetian blind actuator‚ 4 x AC 230 V‚ 6 A‚ with sunlight tracking of slats N 523/04

2015年4月22日 at 上午11:53分类:SIEMENS instabus

V 4 channels
V For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with
a motor for AC 230 V and electromechanical limit switches
V Rated contact voltage AC 230 V‚ 50 Hz
V Automatic mode for sunlight tracking control
V Manual mode
V Indication of direct operation with status object
V Status position of slats‚ 8-bit
V Suitable for integration in a sunlight tracking control system
V Sun protection control (up/down) using position data (8-bit value)
V Integrated power supply unit for the electronics‚ connected to AC 230 V
V Slat control (open/close) using position data (8-bit value) or travel to end position‚ stopping‚ stepwise
adjustment

Roller shutter actuator‚ 4 x AC 230 V‚ 6 A N 523/03

2015年4月22日 at 上午11:52分类:SIEMENS instabus

V 4 channels (one up and one down each)
V Rated contact voltage AC 230 V‚ 50 Hz
V Integrated 1-bit scene control‚ 2 Scenes to be integrated per channel
V Integrated power supply unit for the electronics‚ connected to AC 230 V
V Separate raising/lowering protection

Venetian blind actuator‚ 4 x AC 230 V‚ 6 A N 523/02

2015年4月22日 at 上午11:51分类:SIEMENS instabus

V 4 channels
V For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with
a motor for AC 230 V and electromechanical limit switches
V Rated contact voltage AC 230 V‚ 50 Hz
V Status position of slats‚ 8-bit
V Integrated 1-bit scene control‚ 2 Scenes to be integrated per channel
V Separate raising/lowering protection
V Integrated power supply unit for the electronics‚ connected to AC 230 V
V Sun protection control (up/down) using position data (8-bit value)

Venetian blind actuator‚ 4 x AC 230 V‚ 8 A‚ with limit position detection and sunlight tracking N 522/03

2015年4月22日 at 上午11:49分类:SIEMENS instabus

For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with
a motor for AC 230 V and electromechanical or electronic limit switches
V Integrated electronics for detection of the actuation of an electromechanical limit switch and with
auto-calibration of the travel time from one limit switch to the other
V Electrically interlocked relays to reverse the direction of rotation
V Relay contacts rated for nominal voltage AC 230 V‚ 8 A (resistive load)
V Configuration by the user whether all actuator channels are to be identically or individually parameterized
V Communication objects per actuator channel for moving the sun protection to the limit positions or
to stop travel and for step-by-step adjustment of the blind slats
V Communication objects for moving the sun protection and adjusting the blind slats directly to a new
position (as precisely as drive mechanics permit) by positioning commands as percentage values
V Automatic opening of blind slats up to a set position after the blinds have been lowered without any
stop from the upper to the lower limit position
V Integrated 1-bit scene control for save and recall of 2 favored positions of blind and slats
V Integrated 8-bit scene control and assignment of up to 8 scenes per channel
V Optional object “Sunshine” for activation / deactivation of sunlight tracking of the slats for shading
with greatest possible daylight component
V Differentiation between automatic and manual mode and with automatic switchover from automatic
to manual mode of the respective actuator channel on activation of a bus pushbutton for manual control
of the sun blind
V Priority of manual mode over automatic positioning commands
V Alarm object per device or per channel for moving the sun protection to the configured safety position
in the event of a wind alarm e.g. and with blocking of travel to another position as long as alarm pending
V Travel blocking object per device or per channel for blocking the sun protection in its current position
(needed during cleaning of an outdoor Venetian blind e.g.)
V Status objects per actuator channel for query or automatic transmission of sun blind and slat position
as percentage value
V Electronics powered via an integrated power supply unit for AC 230 V
V Green LED for displaying the 230 V operating voltage
V Pushbutton for switchover between bus mode and direct mode
V Yellow LED for display of activated direct mode
V Two pushbuttons each per actuator channel for drive control in direct mode
V Integrated in the actuator housing and operational if the actuator is supplied with AC 230 V (even if
bus voltage missing or communication not operational)
V Integrated bus coupling unit with only half a standard bus load
V Bus connection via bus terminal or contact system to data rail
V Modular installation devices for mounting on TH35 EN 60715 mounting rail

Presence detectors

2015年4月22日 at 上午11:48分类:SIEMENS instabus

V Used as passive infrared detector for indoor ceiling installation
V Sensing range‚ horizontal 360 °‚ vertical approx. 100°‚ rotating/swiveling sensor head‚ optionally for
shading off parts of the sensing range
V For monitoring an area for presence up to approx. 6 x 3.5 m‚ for a mounting height of 2.8 m (presence
detection)‚ motion detection up to 5 x 3.5 m
V Mixed light measurement‚ measuring range 20…1000 lux
V Presence detection for three function blocks (presence detector‚ motion detector and HVAC detector)
V Functions: Switching on/off‚ 8-bit value‚ 16-bit value‚ temperature value‚ brightness value‚ 8-bit scene
control
V Blocking object per function module
V Adjustable delay time per function module‚ which can be optionally set to a fixed time‚ or two times
that can be switched between via bus‚ or set to one value via bus
V Parallel operation of several presence detectors (master-slave‚ master-master) without logic modules
V Integrated IR receiver for S 255/11 IR remote control with six pushbutton pairs (see accessories)
V In the case of individual pushbuttons‚ selectable function per pushbutton: Switching Over‚ Switching
On‚ Switching Off‚ call up 8-bit scene‚ 8-bit value‚ 16-bit value‚ temperature value‚ brightness value
V In the case of pushbutton pairs‚ selectable function Switching on/off‚ switching over/over‚ 2-pushbutton
dimming with stop telegram‚ 2-pushbutton sun protection control‚ transmit variable 8-bit value‚
8-bit scene control
V Blocking object for IR receiver decoder
V LED for display of detected motions in test mode
V Mounting on the ceiling in a flush-mounting device box with 60 mm diameter and at least 40 mm
mounting depth‚ or in an AP 258E surface-mounting enclosure‚ which must be ordered separately (see
accessories)

Presence detector with brightness sensor UP 258E21
V Integrated constant light level control and 2-step light control‚ optionally available in fully automatic
or semi-automatic version
V 4 channels for offset groups

 

Motion detector with brightness sensor UP 258D11
V Integrated 2-step light control‚ optionally available in fully automatic or semi-automatic version
V 3 independent control channels each with 2 start objects and 2 end objects

Switch / dimming actuator‚ triple‚ 230 V AC‚ 50 / 60Hz‚ 6A‚ with integrated constant light level control N 526/02

2015年4月22日 at 上午11:47分类:SIEMENS instabus

Can be operated per channel as a pure switching/dimming actuator or as a constant light controller in
master or slave operation mode
V 3 switch outputs for the connection of max. 30 electronic ballasts for 2 x 36 W FL/max. 20 electronic
ballasts for 1 x 58 W FL or max. 15 electronic ballasts for 2 x 36 W FL/max. 10 electronic ballasts for 2
x 58 W FL
V 3 control voltage outputs DC 1-10 V for the connection of max. 50 dimmable electronic ballasts
V 3 inputs for the connection of one brightness sensor GE 255/x each via a 3-core‚ max. 100 m long
cable‚ which is also used as a power supply for the sensor electronics
V Communication objects for sending the measured brightness values
V Communication objects per actuator channel to control the following operating modes: comfort
mode‚ automatic mode and night operation as well as switching‚ dimming and value setting
V Time-dependent activation of the lighting during night operation (lighting for cleaners)
V Automatic toggling from automatic to manual operation of the relevant actuator channel when the
bus push button is pressed for manual switching and dimming of this channel (constant light control
inactive during manual operation)
V Status objects per channel for switching state or dimming value
V Integrated power supply unit for AC 230 V‚ 50 Hz to supply the actuator electronics and a green LED
for operational display
V Push button per actuator channel for local switching of the outputs or for starting a calibration of the
sensor‚ integrated in the actuator housing and able to function even when the bus cable is not
installed and when there is a failure of the bus communication
V Connection of the 230 V supply voltage and all the outputs/inputs via screw terminals 0.5 … 4 mm
V Integrated bus coupling unit‚ bus connection via bus terminal
V Modular installation devices for mounting on TH35 EN 60715 mounting rail